Filter
Top Products
- 25 -
Mail
Click the Mail item of the Tools submenu to bring up the following screen for
setting up e-mail function of the camera.
When you select By E-mail, the system will enable the alert function which will
notify you IP Change or Motion Detection events by e-mail. If you select None,
the system will do nothing.
- By E-mail: Configure the following settings. There are six basic settings in
this field for your e-mail server.
• SMTP Login Name: Enter the user name to login receiver’s e-mail server.
• SMTP Password: Enter the user password to login receiver’s e-mail
server.
• SMTP (mail) Server: SMTP (Simple Mail Transfer Protocol) is a protocol
for sending e-mail messages between servers. Input the mail server
address in this field.
• Return Email Address: Enter the e-mail address of the user who will be
sending the e-mail.
• Recipient Email Address: Enter the e-mail address of the user who will
be receiving the e-mail.
• SMPT Port: Enter the e-mail port used on your computer in this field. The
default setting is port 25.
- Motion Detection Set Skip Time: Sets up the duration of motion detection.