Filter
Top Products
March 10, 2009 Dolphin Interconnect Solutions 23
www.dolphinics.com
If there is a fiodrive error entry warning of old firmware, as in the example above,
follow the instructions in the Section 3.2.4.3 later in this guide to update the firmware.
If the System Event Log shows no fiodrive error entries, then your ioDrive is ready to
receive a Windows file system.
If you choose to enable SNMP support, refer to Section 3.6.
3.1.5 ioDrive Naming
The ioDrive receives a name and number as part of the install process for identification.
The syntax is fctx where x is the number of the PCIe bus where you installed the
ioDrive. Use ioManager to view this bus number or you can:
1. Choose Start > Control Panel > System > Hardware > Device Manager.
2. Select Fusion-io Devices. (Select System Devices for pre-1.2.3 drivers.)
3. Click on your ioDrive in the list. The Properties dialog appears.
The Location field shows the PCIe bus number for your device (fct13 in this case):