Filter
Top Products
March 10, 2009 Dolphin Interconnect Solutions 24
www.dolphinics.com
Note:
The system manufacturer assigns bus numbers, which can range from 0 on up.
These numbers may or may not reflect the physical location of the bus. For example, the
second slot from the edge of the motherboard may be Bus 2, but it could also be Bus 16
or another arbitrary number. Checking Device Manager is one way to confirm the
specific bus number for your installation. You can also use ioManager to view this
number.)
3.1.6 Adding a File System to the ioDrive
With the ioDrive and driver installed, you can now use the Windows Disk Management
utility to make your device available to applications. Typically, Windows will detect the
new device, initialize it and display it in Disk Management. You can then add
partitions, format a volume, or create a RAID configuration on your ioDrive using the
standard Windows procedures (see the Windows Disk Management Utility documentation
for more details)
If Windows does not, you may need to initialize it manually. To initialize an ioDrive:
1. Select Start >
Control Panel.
2. Click Administrative Tools.
3. Click Computer Management.
4. Click Disk Management in the Storage section of the console tree.