Filter
Top Products
Configuring the Switch
3-192
3
Configuring a Network Address Pool
Web – Click DHCP, Server, Pool Configuration. Click the Configure button for any
entry. Click the radio button for “Network.” Enter the IP address and subnet mask for
the network pool. Configure the optional parameters such as gateway server and
DNS server. Then click Apply.
Figure 3-111 DHCP Server Pool - Network Configuration
CLI
– This example configures a network address pool.
Console(config)#ip dhcp pool tps 4-126
Console(config-dhcp)#network 10.1.0.0 255.255.255.0 4-127
Console(config-dhcp)#default-router 10.1.0.253 4-127
Console(config-dhcp)#dns-server 10.2.3.4 4-128
Console(config-dhcp)#netbios-name-server 10.1.0.33 4-130
Console(config-dhcp)#netbios-node-type hybrid 4-131
Console(config-dhcp)#domain-name example.com 4-128
Console(config-dhcp)#bootfile wme.bat 4-129
Console(config-dhcp)#next-server 10.1.0.21 4-129
Console(config-dhcp)#lease infinite 4-131
Console(config-dhcp)#