Filter
Top Products
34 ArtixScan 1100 Hardware User’s Guide
English
System Menu:
The System Menu displays current scanner information,
lets you view the SCSI chain status, and lets you view
the About dialog box of the Scanner ICC Profiler
program.
1. Get Current Scanner Info: This command provides
information on the current scanner. A dialog box
appears showing the scanner model in use, the SCSI
ID number of the scanner, and the firmware version
of the scanner.
2. Scanner Probe: This command displays the SCSI
devices on the SCSI chain, as well as the SCSI ID
numbers of the individual devices.
To use this command:
1. Choose the Get SCSI Chain Info
command.
2. If your scanner does not show in the
list, make sure it is connected and
turned on, then click on the Probe
button in the dialog box.
• Choose the correct interface card
in the card selection box.
• Check the numbered box
corresponding to the SCSI ID of
your scanner. Click OK to close
the dialog box.
3. About: This command displays the splash screen of
the Scanner ICC Profiler program, including the
product logo and the software version number.