Filter
Top Products
Printer Panel 1
– 46 –
4581-7777-01
19.3 Common Settings for Controllers
(The recommended settings are underlined and the settings within [ ] are the default set-
tings.)
19.4 Settings Required for a Local Connection
(IEEE1284 (Centronics))
Controller settings
(The recommended settings are underlined and the settings within [ ] are the default set-
tings.)
PC Settings
1. Start up the Add Printer Wizard, and then click [Next].
2. In the dialog where the printer connection can be selected, select [Local printer], and
then click [Next].
3. In the dialog where the manufacturer and model of the printer can be selected, click
[Have Disk].
4. Click [Browse], select the setting file from the corresponding folder on the CD-ROM,
and then click [OK].
5. Select the model of the printer from the printer list, and then click [Next].
6. Select the LPT1 port, and then click [Next].
7. When [Next] is clicked, installation of the driver will begin.
8. Specify the printer name and whether the printer will be the default printer and
whether a test print will be printed.
3. When “Continue to Setup?” appears, selec
t
“Yes ”, and then press the [Set] key.
C4581U015AA
Server Setup Server Name Enter the server name.
Printer Setup Publish Direct Yes
/No [Yes]
Publish Print Queue Yes
/No [Yes]
Publish Hold Queue Yes
/No [Yes]
Network Setup Port Setup >
Parallel Port Setup
Enable Parallel Port Yes
/No [No]
Port Timeout 5-60 [5]
Ignore EOF Yes
/No [Yes]