Filter
Top Products
Printer Panel 1
– 47 –
4581-7777-01
19.5 Specifying the Settings Necessary for Printing on a Net-
work
The following procedure describes how to specify the settings necessary for printing on a
network.
Follow the procedure described below to specify the settings necessary for printing on a
network.
1. Refer to [Settings Required for a Local Connection] and install the printer driver. At this
time, specify the LPT1 port as the printer port.
NOTE
Do not print a test page yet.
Perform the test print after the network connection settings have been specified.
2. Follow the procedure below to specify the settings necessary for printing on a net-
work. Change the printer port from the one specified when the printer driver was
installed in step 1 to a port for a network connection, and then change any controller
settings as necessary.
NOTE
For IPP printing and NetWare printing, begin from the time when the printer driver was
added.
■
■■
■
Network Printing on a Computer Running Windows
Procedure for connecting a network that can be selected for the various Windows operat-
ing systems
The procedure for specifying settings differs depending on the output procedure (LPR,
Windows printing or IPP).
Follow the appropriate connection procedure for the environment that you are using.
■
■■
■
SMB printing
Controller settings
(The recommended settings are underlined and the settings within [ ] are the default set-
tings.)
PC Settings
• From the window displayed by clicking the Start button, pointing to [Settings], then
clicking [Printers], select the printer. Then, from the menu that appears by right-click-
ing the printer, click [Properties].
For Windows 98 and Me:
1. Click the Details tab, and then click [Add Port...].
2. Select [Network], and then click [Browse...].
3. From the console tree showing the network configuration, select the printer with the
server name registered in the controller.
4. Click [Close] to close the dialog.
For Windows NT 4.0, 2000 and XP:
1. Click the Ports tab, click [Add Port], double-click [Local Port], and then type in
[\\server_name\print].
2. Click [Close] to close the dialog.
Windows
98/Me
Windows NT
4.0
Windows
2000
Windows XP Protocol
Used
LPR
222
TCP/IP
SMB
2222
IPP
22
Network Setup Protocol Setup >
TCP/IP Setup >
Ethernet Setup
TCP/IP-Ethernet Yes/No [Yes]
Enable AutoIP Config Yes/No
[Yes]
IP Address Enter the IP
address.
Subnet Mask Enter the subnet
mask.
Gateway Address Enter the IP
address of the
gateway.
Service Setup >
Windows Setup
Enable Windows Printing Yes
/No [Yes]
Choose Domain Select from list/
Enter manually
[Select from list]