Filter
Top Products
1.4 Components and Their Functions
1
Di2010/Di2510/Di3010/Di3510 1-7
Introduction Chapter 1
No. Part Name Description
9 Paper Feed Cabinet PF-124
(optional)
Equipped with a paper drawer that can supply 500 sheets of
paper, for upper paper feed unit only.
Referred to as the “paper feed cabinet” throughout the manual.
10 Built in Finisher FN-117
(optional)
Finishes printed pages according to the selected finishing mode
(sorting or stapling), then feeds out the pages.
Referred to as the “finisher” throughout the manual.
11 Additional Bin Kit AK-1
(optional)
If this option is attached to the finisher, the bins for separating
printed pages increases.
Referred to as the “3rd paper output tray” throughout the
manual.
12 Saddle Kit SK-1 (optional) If this option is attached to the finisher, stapling, hole-punching,
creasing and booklet-printing are available as Finishing
settings.
Referred to as the “saddle kit” throughout the manual.
13 Mail Bin Kit MK-1 (optional) If this option is attached to the finisher, the printed pages can be
divided and fed into the appropriate bin assigned to a specific
individual or group.
• This option can only be used with computer printouts.
Referred to as the “mail bin kit” throughout the manual.
14 Punch Kit PK-6
(optional)*
If this option is attached to the finisher, hole-punching is
possible.
Referred to as the “punch kit” throughout the manual.
15 32 MB/64 MB/128 MB
Memory
M32-4/M64-2/M128-3
(optional)*
Increases the memory of the copier to as much as 192 MB.
(64 MB standard memory + 32/64/128 MB expanded memory)
By expanding the memory, the number of pages that can be
stored in the memory can be increased.
Referred to as the “expansion memory” throughout the manual.
11
10
9
1213