Filter
Top Products
5
5.6 Loading Paper
5-16 Di2010/Di2510/Di3010/Di3510
Copy Paper Chapter 5
To set a non-standard (custom) paper size
If non-standard-sized paper is loaded, it will be necessary to enter the paper size.
Two non-standard paper sizes can be stored for easy selection. For details, refer to
the next section.
✎
Note
Where you do not wish to set the custom size, press the [Panel Reset] key, or
exceed the auto panel reset time, and this will reset to the default settings.
1 Touch [Paper].
2 Touch the button for the multiple
bypass tray, and then touch [Mode
Change].
3 Touch [Custom Size].
The Custom Size screen appears.
4 Touch and press the [C] key.
Then, touch and to
select the length of side X for the
paper that is loaded.
❍ Touch so that the cursor
moves below the digit that you
wish to change.