Filter
Top Products
Menu item Description
Pixel Boost
Off
Fonts
Horizontally
Vertically
Both directions
Choose whether to make characters more distinct and definite. Pixel Boost may be
needed when using certain fonts.
Note: Off is the factory default setting.
Brightness
-6–6
Adjusts or darkens printed output and conserves toner
Note: 0 is the factory default setting.
Contrast
0–5
Adjusts the contrast of printed objects
Note: 0 is the factory default setting.
PostScript menu
Menu item Description
Print PS Error
On
Off
Prints a page containing the PostScript error
Note: Off is the factory default setting.
Font Priority
Resident
Flash/Disk
Establishes the font search order
Notes:
• Resident is the factory default setting.
• A formatted flash memory option card must be installed in the printer and
operating properly for this menu item to be available.
• The flash memory option cannot be Read/Write, Write, or
password-protected.
• Job Buffer Size must not be set to 100%.
PCL Emul menu
Menu item Description
Font Source
Resident
Download
Flash
All
Specifies the set of fonts available
Notes:
• Resident is the factory default setting. It shows the factory default set of
fonts downloaded into RAM.
• Download appears only if downloaded fonts exist. It shows all the fonts
downloaded into RAM.
• Flash appears only if a flash option containing fonts is installed.
• A flash option must be properly formatted and cannot be Read/Write,
Write, or password protected.
• All shows all fonts available to any option.
Font Name
<x>
Lets you view or change the setting from a selection list
Understanding printer menus
83