Monarch 9450 Printer User Manual


 
7. Remove the battery. Press [On/Off] while you re-connect
the battery to return to normal print operations.
Connecting the Communications Cable ––––––––––––––––––––––––
To attach the communications cable:
1. Grasp the cable holder and position the connector to
match the frame around the printer port.
2. Insert the connector into the printer port until the
connector locks into place. You may hear a click as the
latch snaps into place.
3. Pull the cable holder gently to make sure it is secure.
4. Plug the other end of the cable into the host.
nDo Not carry or drag the printer by the cable. Also, remove
the cable when not using the printer.
See Chapter 7, "Specifications," for cable pin definitions.
Printer
Port
Cable
Holder
Chapter 3. Printer Communications
3-3