Filter
Top Products
Problem Solution
Print has voids or is too light. Make sure the supplies are loaded
correctly.
Check the supplies for damage or
defects. Reload supplies if necessary.
Check the peel roller for jammed
supplies.
Check the supply type (i.e., indexed
or non-indexed). Have the System
Administrator set the supply type.
Turn the printer off and switch to a
fully charged battery.
Clean the printhead.
Printer does not feed. Turn the printer off and switch to a
charged battery.
Reload the supplies.
Verify that a label is not jammed in
the label path.
Make sure the printer is not in sleep
mode. Press [On/Off].
Make sure no foreign matter is in the
supply spool.
Make sure the supply turns freely in
the supply well.
Make sure the printhead is closed.
9450 Operator’s Handbook
6-4