Filter
Top Products
3
3
Chapter 3 Featured Functions
This chapter explains how to access a MOXA EtherDevice Switch’s various configuration,
monitoring, and administration functions. There are three ways to access these functions: serial
console, Telnet console, and web browser. The serial console connection method, which requires
using a short serial cable to connect MOXA EtherDevice Switch to a PC’s COM port, can be used
if you do not know MOXA EtherDevice Switch’s IP address. The Telnet console and web browser
connection methods can be used to access MOXA EtherDevice Switch over an Ethernet LAN, or
over the Internet.
The Web Console is the most user-friendly way to configure a MOXA EtherDevice Switch. In this
chapter, we use the Web Console interface to introduce the functions of a MOXA EtherDevice
Switch. There are only a few differences between the Web Console, Serial Console, and Telnet
Console access methods.
The following topics are covered in this chapter:
Configuring Basic Settings
Configuring SNMP
Using Communication Redundancy
Using Traffic Prioritization
Using Virtual LAN
Using Rate Limiting
Using Auto Warning
Using Line-Swap-Fast-Recovery
Using Set Device IP
Using Diagnosis
Using the Monitor
Using the MAC Address Table
Using Event Log