Filter
Top Products
EDS-408A/405A Series User’s Manual Featured Functions
3-13
The Factory Default function is included to give users a quick way of restoring MOXA
EtherDevice Switch’s configuration settings to their factory default values. This function can be
accessed from either the telnet/RS-232 Console, or Web Browser interface.
NOTE
After activating the Factory Default function, you must use the default network settings to
re-establish a web-browser or Telnet connection with your MOXA EtherDevice Switch.
Configuring SNMP
EDS supports SNMP protocol. The available versions are SNMP V1, SNMP V2c, and SNMP V3.
SNMP V1 and SNMP V2c use a community string match for authentication, which means SNMP
servers access all objects with read-only or read/write permissions using the community string
public/private (default value). SNMP V3, which requires you to select an authentication level of
MD5 or SHA, is the most secure protocol. You can also enable data encryption to enhance data
security.
SNMP security modes and security levels supported by EDS are shown in the following table.
Select the security mode and level that will be used to communicate between the SNMP agent and
manager.
Protocol
Version
Security
Mode
Authentication
Type
Data
Encryption
Method
V1, V2c
Read
Community
Community
string
No
Use a community string match
for authentication
SNMP V1,
V2c
V1, V2c
Write/Read
Community
Community
string
No
Use a community string match
for authentication
No-Auth No No
Use account with admin or user
to access objects
MD5 or SHA MD5 or SHA No
Provides authentication based on
HMAC-MD5, or HMAC-SHA
algorithms.
8-character passwords are the
minimum requirement for
authentication.
SNMP V3
MD5 or SHA MD5 or SHA
Data encryption
key
Provides authentication based on
HMAC-MD5 or HMAC-SHA
algorithms, and data encryption
key. 8-character passwords and a
data encryption key are the
minimum requirements for
authentication and encryption.