Filter
Top Products
3-12 Industio CP-114 User's Manual
Board and Port Ready Stage
Click [OK] for all the dialog boxes to finish the configuration and exit the “CP-114 Series
Installation” dialog box.
In this last stage, you will complete the driver installation.
Windows 95 Windows 98
After the port installation, you can immediately use the
COM ports of the Industio CP-114 Series board without
restarting Windows 95 system.
After the port installation, click on the [Finish] button. Now
you can immediately use the COM ports of the Industio
CP-114 Series board without restarting Windows98
system.
Once the installation is finished, error conditions of the board, if any, are displayed on the screen.
Otherwise, everything should be fine.
If an error message similar to “CP-114 (BusNo=x, DevNo=x, Port1=COMx) interrupt number is
invalid!” appears, refer to the “Troubleshooting” chapter for solutions.
Note ! Up to now, the driver installation of the Industio CP-114 Series is complete and
successful, including the board and port configuration. However, if changes of the
board and port configuration are needed, please refer to the next section, “Configuring
Board and Port”, for more configuration details.
Note ! Once the board and the driver are installed and the driver restarts successfully, you can
start to develop applications with the PComm library (See “Serial Programming Tools”)
or the Microsoft Win32 API. You can also execute any ready-made applications, such as
PComm utility Terminal emulator (See “Serial Programming Tools”) or HyperTerminal
to transmit/receive data, as well as Remote Access Service to provide dial-up
networking capabilities.
• If multiple boards are installed at the same time, the same scenario applies for the next boards,
except that no driver diskette is asked anymore.
• Similarly, if you want to add more boards and the driver has been installed before, simply plug the
Industio CP-114 Series board and Windows 95/98 will automatically detect and install the
required driver.