Filter
Top Products
Software Installation
Industio CP-114 User's Manual
3-13
Configuring Board and Port
If you already have installed the driver and want to re-configure the COM number for the ports
under Windows 95/98, follow this procedure.
1. Open the [Control Panel], click on the [System] icon, select the [Device Manager] tab, and
then [MOXA Smartio/Industio multiport board]. Select the desired [CP-114 Series] entry,
click on the [Properties] button and select the [Ports Configuration] tab.
#
2. Assign the desired COM number for the Industio CP-114 Series port mapping or FIFO settings,
detailed in the stage, “Port Configuration Stage”, of the previous section, “Installing Driver”.
3. Restart the system to activate the latest configuration.