Filter
Top Products
About This Manual
This manual is composed of six chapters and one appendix. This manual is written for installer, system administrator and
software programmer.
If you are a first-time installer and system administrator, we recommend you to go through the whole manual except
Chapter 4.
If you are a software programmer, you may refer to chapter 4, “Serial Programming Tools”.
If you need cable wiring information, please see chapter 5, “Connection Cable and Cable Wiring”.
If you encounter any problem during installation, please refer to chapter 6, “Troubleshooting”.
Chapter 1 Introduction
Overview and features for the Industio CP-114 Series are described. Also check list and overall installation guide.
Chapter 2 Hardware Installation
Hardware installation for the Industio CP-114 Series is detailed.
Chapter 3 Software Installation
Software installation, configuration, driver loading/unloading, driver upgrade and removal for various operating
systems: Windows NT, Windows 95/98 and DOS.
Chapter 4 Serial Programming Tools
Roughly describing the programming tools for various O.S. platforms, including PComm under Windows NT and
Windows 95/98, and API-232 under DOS. Also RS-485 programming issue is covered.
Chapter 5 Connection Cable and Cable Wiring
Describing the RS-232 and RS-422/485 cable wiring.
Chapter 6 Troubleshooting
Describing the problems and possible answers for the Industio CP-114 Series.
Appendix
Specification details, PCI, UART and DB37 pinouts are described.