Filter
Top Products
T1 Phonebook Configuration MultiVOIP User Guide
188
Add/Edit Inbound Phone Book: Field Definitions
(cont’d)
Field Name Values and Description
Ring Count 0, 1, 2, 3, etc. When “No Response” is
condition for forwarding calls, this
determines how many unanswered rings
are needed to trigger the forwarding.
Registration
Option
Parameters
In an H.323 voip system, gateways can
register with the system using one of these
identifiers: (a) an E.164 identifier, (b) a Tech
Prefix identifier, or
(c) an H.323 ID identifier.
In a SIP voip system, gateways can register
with the SIP Proxy.
In an SPP voip system, gateways can register
with the SPP Registrar voip unit.
5. When your Outbound and Inbound PhoneBook entries are
completed, click on Save Setup in the sidebar menu to save your
configuration.
You can change your configuration at any time as needed for your
system.
Remember that the initial MultiVOIP setup must be done locally or via
the built-in Remote Configuration/Command Modem using the
MultiVOIP program. After the initial configuration is complete, all of
the MultiVOIP units in the VOIP system can be configured, re-
configured, and updated from one location using the MultiVOIP web
GUI software program or the MultiVOIP program (in conjunction with
the built-in modem).