Filter
Top Products
MultiVOIP User Guide Operation & Maintenance
305
Download Firmware transfers the firmware (including the H.323
protocol stack) in the PC’s MultiVOIP directory into the nonvolatile
flash memory of the MultiVOIP.
Download Factory Defaults sets all configuration parameters to the
standard default values that are loaded at the MultiTech factory.
Upgrade Software implements both the Download Firmware
command and the Download Factory Defaults command.
Downloading Firmware
1. The MultiVoip Configuration program must be off when invoking
the Download Firmware command. If it is on, the command will
not work.
2. To invoke the Download Factory Defaults command, go to Start |
Programs | MVP____ x.xx | Download Firmware.