Filter
Top Products
Chapter 7 – Voice Commands
Multi-Tech Systems, Inc. SocketModem MT5600SMI Developer’s Guide 102
<DLE> Shielded Codes Sent to the Modem (DCE)
Table 7-3 lists the supported <DLE> shielded codes sent to the modem in the expression <DLE><code>.
The number in parenthesis in the second column corresponds to the T.50 equivalent.
Table 7-3. Supported <DLE> Shielded Codes Sent to the Modem (DCE)
Code Code Simple Action Command Description
<DLE> (1/0) Two contiguous <DLE><DLE> codes indicate a single <DLE>
in the data stream ("Immediate Command" or "Stream
Command")
u (7/5) [Action Numbers 0 and 3] Increase the volume or gain by one
unit ("Immediate Command")
d (6/4) [Action Numbers 1 and 4] Decrease the volume or gain by one
unit ("Immediate Command")
p (7/0) [Action Number 9] Pause
r (7/2) [Action Number 10] Resume
<ETX> (0/3) [Action Number 11] End voice Transmit State ("Stream
Command")
<CAN> (1/8) [Action Number 12] Clear transmit buffer of voice data
("Immediate Command")
! (2/1) [Action Number 15] Receive abort ("Immediate Command")