Filter
Top Products
Appendix B – Product Approvals, Regulatory Design Considerations, and Regulatory Compliance
Multi-Tech Systems, Inc. SocketModem MT5600SMI Developer’s Guide 128
(e) Certification Numbers granted prior to the implementation of the above marking format are
grandfathered.
(i) For previously certified TE, the self-marking format shall consist of the old certification
number preceded by “IC:” For example, if the certification number is “123 1234 A”, then the
self-mark would read “IC: 123 1234 A”.
(ii) For a new model that is registered to a family of previously certified TE, the self-marking
format shall be:
IC: XXXXXX-ZZZZZZZZ
Where:
· “XXXXXX” is the Company Number, as in (d) above ; and
· “ZZZZZZZZ” is either the old certification number minus the old company number,
or a new Unique Product Number assigned by the applicant. For example, if a
new model is registered to the family of products with certification number “123
1234 A”, and that the Company Number for the registration is “123A”, then the
self-mark for this new model would read “IC: 123A-1234 A”. If the applicant
decides to replace “1234 A” with a new UPN, say “5678", then the self-mark would
read “IC: 123A-5678".
Industry Canada
This Class B digital apparatus meets all requirements of the Canadian Interference-Causing
Equipment Regulations.
Cet appareil numérique de la classe B respecte toutes les exigences du Reglement Canadien sur
le matériel brouilleur.
Multiple Listing
This terminal device may be multiple listed to other distributors based upon the approval granted
to the original certificate holder. In order to obtain a multiple listing certification, the following
documentation must be presented to Industry Canada:
(a) The model number, Industry Canada certificate number and certification number of the
approved equipment;
(b) A letter from the original certificate holder authorizing the Department to use information
on file to grant a multiple listing certification. The name/model number, certificate number
and certification number for the subject equipment must be shown. The letter must also
declare that the model to be multiple listed is identical in design and construction to the
originally approved model;
(c) A letter, from the proposed multiple listee, requesting the certification;
(d) A Terminal Equipment Certification / Testing Application and Agreement form, completed
by the proposed multiple listee;
(e) A drawing, sample or illustration of the product label; and
(f)
Payment in accordance with TRC-49 section on Multiple Listings.