![](http://pdfasset.owneriq.net/e/91/e9197e26-1569-412f-be2b-9409f83a1959/e9197e26-1569-412f-be2b-9409f83a1959-bg1c.png)
QS: Gathering Phone/IP Details MultiVOIP User Guide
28
Config Info CheckList
Type of Config Info
Gathered
MultiVOIP
Configuration
screen
on which to enter
Config Info
√
IP info for voip unit
● IP address
● Gateway
● DNS IP (if used)
● 802.1p Prioritization
(if used)
Ethernet/IP Parameters
Interface Type
(Choices: E&M, FXS/FXO*,
DIP, DPO)
Interface Parameters
*In FXO/FXS systems,
channels used for phone, fax,
or key system are FXS;
channels used for analog
PBX extensions or analog
telco lines are FXO.
E&M info (only if E&M is used)
● Type (1-5) ● 2 or 4 wires?
● Dial Tone or Wink?
Interface Parameters
Country Code Regional Parameters
Email address for voip (optional) SMTP Parameters
SIP Operating Mode
● Survivability ● Stand-Alone
SIP Server Configuration
Network Locations of Alternate
SIP Proxy units, if used
(IP Address or Domain Name)
Alt #1:
Alt #2
SIP Call Signaling
Endpoint Info
Device Name Regist Type
IP Address Port
--------------------------------------
Device Name Regist Type
IP Address Port
SIP Server Predefined
Endpoints
Reminder: Be sure to Save Setup after entering configuration values.