Filter
Top Products
Index MultiVOIP User Guide
398
function tracing on/off (logging) .. 172
FXO Disconnect On fields............ 141
FXO disconnection criteria........... 134
FXO disconnection, triggering of 140,
141
FXO Interface Parameter definitions
.................................................. 134
FXO Interface Parameter fields
Current Loss ............................. 134
Current Loss Detect Timer ....... 134
Detection Range (flash hook) ... 135
Flash Hook................................ 135
Inter Digit Regeneration Timer. 134
Inter Digit Timer (dialing)........134
Message Waiting Indication ..... 134
No Response Timer .................. 134
Regeneration (dialing) .............. 134
Tone Detection.......................... 134
FXO interface(MVP210-SS)
uses of......................................... 75
FXO interface(MVP-410SS/810SS)
uses of......................................... 71
FXO Parameter fields
Caller ID enable........................135
Caller ID Type..........................135
FXO Current Detect Timer.......140
Tone Detection.......................... 140
FXO Parameters............................ 133
FXO Supervision (answer) fields
Answer Delay ........................... 140
Answer Delay Timer................. 140
Answer Tones........................... 140
Available Tones........................ 140
Current Reversal....................... 140
Tone Detection.......................... 140
FXO Supervision (disconnect) fields
Available Tones........................ 142
Current Loss ............................. 141
Current Loss Timer...................141
Current Reversal....................... 141
Disconnect Tone Sequence....... 142
Disconnect Tones...................... 142
DTMF Tone.............................. 142
Silence Detection Enable.......... 141
Silence Detection Type.............141
Silence Timer............................ 141
Tone Detection......................... 142
FXO Supervision Parameter
definitions .................................140
FXS interface(MVP210-SS)
uses of .........................................75
FXS interface(MVP-410SS/810SS)
uses of .........................................71
FXS Loop Start Interface parameter
definitions .................................129
FXS Loop Start Interface Parameter
fields
Caller ID enable........................132
Caller ID Enable........................131
Caller ID Type ..........................131
Current Loss..............................130
Detection Range (flash hook)....131
Inter Digit Regeneration Timer.130
Inter Digit Timer.......................130
Message Waiting Indication......130
Pass Through Enable.................131
Ring Count................................130
FXS Loop Start Parameter fields
Generate Current Reversal........130
Inter Digit Timer.......................129
Message Waiting Light .............129
FXS Loop Start Parameters...........129
FXS/FXO connector
MVP210-SS................................75
MVP-410SS/810SS.....................71
G711 coders (RTP packetization,
voice/fax) ..................................322
G723 coders (RTP packetization,
voice/fax) ..................................322
G726 coders (RTP packetization,
voice/fax) ..................................322
G727 coders (RTP packetization,
voice/fax) ..................................322
G729 coders (RTP packetization,
voice/fax) ..................................322
Gain 1 (custom tone) field ............160
Gain 1 (tone pair scheme) .....157, 158
Gain 2 (custom tone) field ............160
Gain 2 (tone pair scheme) .....157, 158
Gateway (Ethernet/IP Parameters)
field ...........................................106
Gateway Name (callee, statistics,
logs) field ..................................304
Gateway Name (caller, statistics, logs)
field ...........................................304