Multi-Tech Systems MVP210-SS Network Card User Manual


 
MultiVOIP User Guide Technical Configuration
95
Config Info CheckList
Type of Configuration
Info Gathered
MultiVOIP
Configuration
screen on which
to enter the Info
Info
Obtained
Info
Entered
IP Info for voip unit
IP address
Gateway
DNS IP (if used)
802.1p Prioritization
(if used)
Ethernet/IP
Parameters
Interface Type
(Choices: E&M,
FXS/FXO*, DIP, DPO)
Interface
Parameters
*In FXO/FXS
systems, channels
used for phone,
fax, or key
system are FXS;
channels used
for analog PBX
extensions or
analog telco lines
are FXO.
E&M info
(only if E&M is used)
Type (1-5)
2 or 4 wires?
Dial Tone or Wink?
Interface
Parameters
Country Code Regional
Parameters
Email address for voip
(optional)
SMTP Parameters
Reminder: Be sure to Save Setup after entering
configuration values.