Filter
Top Products
38
Chapter4SelfCalibration
●
Set the mode for which SelfCalibration is executed.
Set the time at which SelfCalibration is executed.
Procedure
1. Choose “SelfCalibration” from the Adjustment menu, and press
.
2. Choose “Settings” from “SelfCalibration”, and press
.
3. Choose “Mode Selection” from “Settings”, and press
.
4. Use
or to select the mode to change, and press .
5. Select “On” or “Off” with
or .
6. Press
to exit.
Note
• When “Other Modes” is set to “On”, the monitor color reproduction area is updated and the display in each color
mode will be adjusted as follows:
- In any mode other than CAL mode, the temperature is adjusted so that it is as close as possible to the specied
value.
- In Adobe RGB/sRGB/EBU/REC709/SMPTE-C/DCI modes, the gamut values are adjusted so that they are close to
each specied value.