Filter
Top Products
English
2. CABLE CONNECTION 13
2-2. Connecting the Signal Cable
NOTE
z Be sure that the power switches of both the PC and the monitor are OFF.
1. Plug the signal cable into the connector at the rear of the monitor
and the other end of the cable into the video connector on the PC.
After connecting, secure the connection with the screw-in fasteners.
Analog Input
Signal Cable Connector of the PC PC
Signal Cable (enclosed) Video Output Connector /
D-Sub mini 15 pin
z Standard graphics card
z Power Macintosh G3
(Blue & White) / Power
Mac G4 (VGA)
Signal Cable (enclosed) +
Macintosh Adapter (Optional)
Video Output Connector /
D-Sub 15 pin
z Macintosh
Power Cord