Filter
Top Products
English
4. ADJUSTMENT 21
4. ADJUSTMENT
4-1. Screen Adjustment
Screen adjustments for the LCD monitor should be used in suppressing screen
flickering and also for adjusting the screen to its proper position. There is only one
correct position for each display mode. It is also recommended to use the
ScreenManager function when first installing the display or whenever changing the
system. For convenience, an easy set-up Program installed on the utility disk to assist
in the set-up procedure is provided.
NOTE
z Allow the LCD monitor to stabilize for at least 20 minutes before making image
adjustments.
Adjustment Procedure
1. Press the Auto adjustment button on the front panel.
The message “Your setting will be lost, if you press again now.” appears and
remains on the screen for 5 seconds. While the message is on the screen, press
the Auto adjustment button again to automatically adjust the clock, phase,
screen position and resolution. If you do not wish to do adjust the screen, do
not press the Auto adjustment button again.
NOTE
z The Auto sizing function is intended for use on the Macintosh and on AT-
compatible PC running Windows. It may not work properly in either of the
following cases.When running an AT-compatible PC on MS-DOS (Not
windows). The background color for the “wall paper” or “desktop” pattern is
set to black.
The monitor displays the digital input image correctly based on its pre-
setting data.
If the appropriate screen cannot be made by using the Auto
adjustment button, adjust the screen through the following
procedures. If the appropriate screen can be made, proceed to step 4.