Filter
Top Products
English
5. ATTACHING AN ARM STAND 29
5. ATTACHING AN ARM STAND
The LCD monitor can be used with an arm stand by removing the tilt stand and
attaching the arm stand to the LCD monitor. Using our optional arm or stand is
recommended. (Ask your local dealer for information.)
NOTE
z If you will use the arm or stand of other companies, confirm the followings to the
arm or stand maker before selecting.
– Hole spacing on the arm mounting: 100 mm x 100 mm (VESA compliant)
– Supportable Weight: Total weight of the monitor (without stand) and attaching
equipment such as a cable
– TÜV/GS approved arm or stand
z Please connect cables after attaching an arm stand.
Setup Procedure
1. Lay the LCD monitor down. Do not scratch the panel.
2. Remove the tilt stand by loosening the screws
(4 pcs of M4 x 14 mm).
3. Attach an arm stand to the LCD monitor securely.
Arm-stand
4 Mounting Screws : M4 x 12 mm (Enclosed)