Filter
Top Products
English
20 3. SCREENMANAGER
[Power Resumption Procedure]
Press the Power button.
NOTE
z The off timer function works while the PowerManager is active, but there is no
advance notice before the monitor’s power is switched off.
EIZO Logo Disappearing Function
When switching on the power button on the front panel, the EIZO logo is displyed
for a while. If you desire to display or undisplay this logo, use this function. (Default
is logo appearing.)
[To undisplay]
Switch off the monitor’s power by the power button, then hold down the Enter
button once again and turn the power back on.
[To display]
Switch off the monitor’s power by the power button, then hold down the Enter
button once again and turn the power back on.
Automatically Selecting the Input Signal Function
The monitor will automatically detect the inputted signal of either the connection for
display. (Default: this function is set (“Auto”).)
NOTE
z Connecting Two PCs to the Monitor
When the one computer is switched off or entering the power saving mode, the
monitor will automatically display the other signal.
Use the ScreenManager to switch the input selection to manual.
[Procedure]
(1) Select <Input Signal> in the <Others> menu.
(2) Select <Manual>.