Filter
Top Products
English
22 4. ADJUSTMENT
2. Run the “Screen adjustment program”.
Having read the “Readme.txt” file, run the “Screen adjustment program” in the
enclosed EIZO LCD Utility Disk. Step by step, adjustment is provided by the
wizard guide.
NOTE
z If the user’s operating system has no utility disk (e.g. OS/2), we
recommend setting the desktop pattern to that as shown in the diagram on
the following.
3. Adjust by using <Screen> menu in the ScreenManager.
(1) Vertical bars appear on the screen
→ Use the <Clock> adjustment.
Select the <Clock> and eliminate the vertical bars by using the Right and
Left of the Control buttons.
Do not continuously press the Control buttons, as the adjustment value
will change quickly and make it difficult to locate the most suitable
adjustment point. If the horizontal flickering, blur or bars appear, proceed
to <Phase> adjustment as follows.