Filter
Top Products
Chapter 3: Installation 27
Composite source type
Use the supplied cable to connect up to 4 composite source inputs to your E-Series
Display. The color of each connector defines the video number to which it configures
within the Video Setup Menu:
• Black - Video 1
• White - Video 2
•Red - Video 3
• Green - Video 4
S-Video source type (not supplied)
If you wish to use S-Video source type, you will need to purchase an S-Video cable (Part
no. E55062). You can connect 2 inputs using S-video to each E-Series Display. The color
of each connector defines the video number to which it configures within the Video
Setup Menu:
• Black/White - Video 1/2
• Red/Green - Video 3/4
For further information on setting up your video application, please refer to the Video
chapter of the Reference Manual.
VGA Out (not supplied)
Use this cable to connect to VGA/SVGA monitor, plasma screen television or M1500
monitor. Please ensure that any equipment that you connect conforms to the
following:
Note:
Please refer to page 4 for details of this accessory.
SeaTalk
2
(not supplied)
Use this cable to connect to third party equipment or SeaTalk
2
instruments.
If your system networks two or more E-Series displays, you should ensure that the
SeaTalk 2 connection is made to the display that you have defined as your master unit.
Note:
Please refer to page 4 for details of this accessory.
Display Resolution Refresh rate
E120 800 x 600 56 Hz
E80 640 x 480 60 Hz