Filter
Top Products
28 E-Series Installation Manual
Radar cable (not supplied)
Having ensured that the radar scanner you are using is compatible with the E-Series
Display (see “Compatibility” on page 9), the cable should be connected as follows:
Connecting to a Radome
If you are using a radome this can be powered through the display. Just run your cable
and connect it to the radome and the display.
If the existing cable is too short, please order from the following:
Connecting to an open array
If you are using an open array, this cannot be powered through the display. You will
need to purchase a split pedestal cable:
...for new installations
Part No. Cable length Weight Radome power output
E55065 15m Heavy 2Kw or 4 Kw
E55066 25m Heavy 2Kw or 4 Kw
E55067 10m Light 2kw
E55068 15m Light 2kw
Part No Description
E55063 15m Split pedestal cable
E55064 25m Split pedestal cable
Split pedestal cable
To display
To power
To Open
Array Scanner
D7209-1
Note: You should ensure that the distance (cable route) from the power supply to the
open array is kept to a minimum.