Filter
Top Products
Service Processor 3-53
ML (Message Log)
Execution:
This command can be executed in the AC POWER ON or DC POWER ON state.
Function:
Displays the contents of the iSP message buffer.
(The message output generated in the display operation of the message buffer is not
stored in the message buffer.)
Note: The ML command can be executed in Normal mode or
Maintenance mode.
Table 3-41. ML Display Screen
Screen Image Reference
iSPyz:---> mlENTER>
ML command displays iSP’s message log buffer.
Select interactive mode? (i[nteractive per page]/a[ll]/CR=exit) : i<ENTER>
A
***** start of message logs *******************************************
xxxxxxxxxxxxxxxxx
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
:
:
:
xxxxxxxxxxxxxxxxxxxxxx
Next ? (n[ext]/CR=exit) : n<ENTER>
B
xxxxxxxxxxxxxxxxxxxx
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
:
:
:
xxxxxxxxxxxxxxxxxxxxxxxxxxx
Previous/Next ? (p[revious]/n[ext]/CR=exit) : n<ENTER>
C
xxxxxxxxxxxxxxxxxxxxxxxxxxx
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
:
:
:
xxxxxxxxxxxxxxxxxxx
Previous ? (p[revious]/CR=exit) : <ENTER>
D
***** end of message logs *********************************************
ML command terminated.
E