Filter
Top Products
5-8 I/O Board Installation
3. Access the Main Chassis as follows:
! Remove six screws (three on each side) securing the Main Chassis to the
cabinet (see Figure 5-6).
! Locate the Main Chassis handle under the power supply modules (see
Figure 5-6). Carefully and slowly pull the chassis out of the cabinet until
the side rails lock (click) in place.
!
CAUTION
Check that the cables at the rear of the chassis are free from
being pinched or damaged when you slide the main chassis
forward.
A
A
B
A Server Screws
B Handle
Figure 5-6. Main Chassis Screws and Handle