Filter
Top Products
2-6 System Operation
6. Press Esc on the service processor (SP) keyboard. The iSP (service
processor) login prompt appears.
7. Enter the login name spfw and password nec. (The login name and
password are default values.) The iSP Main Menu screen appears (see
Figure 2-6).
8. At the iSPyz prompt, enter the iSP command
s to enter the SP command
mode.
9. Press
Esc.
Integrated Service Processor.
Cabinet-ID:xx, Location:y, State:ssssss
iSP login: spfw<ENTER>
iSP password: xxxxxxxx<ENTER>
Copyright (C) 2002 NEC Corporation, All Rights Reserved.
Welcome to Integrated Service Processor.
iSP FW version : 01.00 generated on 01/31/2002 19:20:33
iSP MAIN MENU
0) OS(BIOS) serial console of partition#0 (INITIALIZING)
1) OS(BIOS) serial console of partition#1 (RUNNING)
V) Virtual System Operator Panel
S) iSP commands
E) Exit
iSPyz> s
***** SP Command Mode ****
***** enter ESC to do the command input effectively *****
***** enter CTRL+B to quit *****
iSPyz:--->
Figure 2-6. SP Console Screen – SP Firmware Activated