Filter
Top Products
3-22 Windows Setup and Operation
Removing duplex configuration of RDR disks
This section describes how to remove duplex configuration from the disk with RDR setting.
In the example below, the duplication setting of the disks in the Slot 2 of the PCI modules for Group
1 and for Group 2 is removed.
IMPORTANT:
After executing the command, RDR settings will be cancelled but other data will remain.
You cannot break the duplex setting of the following disks:
Disk containing the boot partition or volume
Disk containing page files
Dynamic disk
The display of RDR Utility is not updated automatically. Therefore, update it by clicking
[
Refresh] from [Action] or pressing F5 on the menu after performing operations described
below.
1. Start the RDR Utility, right-click a disk you
want to cancel RDR from the tree in the left
pane, and select [Delete RDR configuration
on Physical Disk].
2. In the [Warning] dialog box, click [Yes].