Filter
Top Products
Installing and Using Utilities 5-79
12. Power off and on the main unit to reboot the system.
After one reboot, the main menu will appear on the management PC’s screen, on which you
can perform hardware setup and run utilities.
TIPS: If the configuration information (CSL_LESS.CFG) in the FD has already been
loaded, the main menu will appear without a reboot.
IMPORTANT: For setting up MWA using Console Redirection (via WAN or direct),
specify “Onboard COM B” to [SerialPort Address] from BIOS setup utility’s [System
Hardware]→[Console Redirection] menu. For details, see “SYSTEM BIOS ~SETUP~”
in Chapter 4.
13. If you use other tools, exit NEC EXPRESSBUILDER and power off/on the main unit.
IMPORTANT: After completing the procedure for remote console connection, click
[Disconnect] on the [MWA Remote Console] window.