NEC DT100 Projector User Manual


 
E-14
Remote Control
ON/STANDBY button
Select buttons (OHP/PC/VIDEO)
MENU button
SET button
/ /t /s buttons
ZOOM buttons
Brightness control buttons
Volume control buttons
AUTO SYNC button
KEY STONE button
•Turns the projector lamp ON/OFF.
Only this button is valid when the projector lamp is turned OFF.
Images from the PC INPUT connector are projected when PC is
selected, images from the VIDEO INPUT when VIDEO is se-
lected, and materials or printed matter placed on the projector are
projected when OHP is selected.
This button shows the MENU display.
The same settings as from the operation panel are available using
MENU items.
Press to fix each menu item.
Use these buttons to change items, adjust values, or select items
in the MENU display.
Use these buttons to scroll the zoom display in the PC ZOOM display.
These buttons adjust the OHP magnification in the OHP mode.
Adjusts the magnification of the PC in the PC mode.
The left button reduces the image, while the right button enlarges
the image.
These buttons adjust the OHP brightness.
The left button makes the image darker, while the right button
makes the image brighter.
These buttons adjust the volume in the PC and the VIDEO modes.
The left button turns down the volume, while the right button turns
up the volume.
This button performs synchronizing automatically. (Valid when PC/
VIDEO is selected.)
These buttons compensate keystoning.
OHP
ON/
STANDBY
AUTO
SYNC
PC VIDEO
MENU SET
ZOOM
BRIGHT
KEYSTONE
VOLUME
MENU button
ON/STANDBY button
AUTO SYNC button
KEYSTONE button
/ / / buttons
Select buttons
(OHP/PC/VIDEO)
SET button
ZOOM buttons
Brightness control button
s
Volume control buttons