NEC DT100 Projector User Manual


 
E-15
Part Names and Functions
Using Remote Control
Use the Remote control within about 6 meters (20 feet) and within an angle of 30˚ either
side of a line at right angles to the front or back of the projector. Note that the distance will
diminish as the batteries become exhausted.
Note that the Remote control will not function if there is any obstacle between it and the
sensor on the projector.
Installing Batteries
1. Press and slide the cover off the battery
compartment.
2. Install two batteries in the battery com-
partment, making sure that they are
aligned as indicated by the (+) and (-)
marks.
3. Slide the cover into position on the
battery compartment.
CAUTION
Handling the Remote control
Do not subject the Remote control to excessive shock.
Do not allow water or other liquids to spill onto the Remote control. If they do, wipe dry immediately.
•Avoid heat and humidity. Remove the batteries if the Remote control will be unused for extended periods.
Do not mix new batteries with old batteries, or batteries of different types.
Do not disassemble or subject batteries to heat. And do not dispose of batteries in fire.
Dispose of a used battery according to the local rules.
The Remote control may not work if an inverter device is near.
NOTE
Use SUM-3 AA-size batteries.
Do not use Ni-Cd batteries or rechargeable batteries. Use only manganese batteries or alkaline batteries.