NEC DT100 Projector User Manual


 
E-20
54321
10 9 8 76
15 14 13 12 11
About the PC INPUT and OUTPUT connectors
A 15-pin mini D-SUB connector is used as the PC INPUT and OUTPUT terminals. The
following shows the correspondence between pins and signals.
1 RED VIDEO 6 GND
11
GND
2 GREEN VIDEO 7 GND
12
----
3 BLUE VIDEO 8 GND
13
H.SYNC
4 GND 9 ----
14
V.SYNC
5 ----
10
GND
15
----
NOTE
The 15-pin RGB input and output connectors on your projector are for analog signals and cannot be connected to
a PC supporting only a digital signal output.