NEC DT100 Projector User Manual


 
E-17
Installation
Projection Distance and Image Size
Use the following diagrams to determine the exact image size and what screen is required
for any given projection distance.
• The focal range is 1.43m (56.3") to 14.86m (585") from the lens. You must install your
projector within this projection distance range.
CAUTION
Installation location
Do not install your projector where excessively hot or cold. The ambient temperature should be within the range of
0
°
C to 35
°
C (32
°
to 95
°
F).
•Position your projector so the sunlight or other bright light source does not strike the screen directly. If sunlight or
other bright light strikes the screen directly, the image will appear white and difficult to see.
If you are using your projector in a brightly lit room, draw the curtains or blinds to darken the area around the
screen.
Do not install your projector where it will be subject to excessive humidity, dust, soot, or tobacco smoke.
Image quality will deteriorate if dirt builds up on the optical components such as the lenses and mirrors.
Do not install your projector where the air vents may become obstructed or there is poor air flow. A rise in
temperature may result in fire and damage. (Note that air vents are located at the bottom and on the right side.)
300 610 457
250 508 381
200 406 305
150 305 229
50 102 76
(inch) cm (inch)
Width x height
(screen size)
1
3
5
79
11 13 15(m)
Screen size
Projection distance
Width
Height
Screen size
(diagonal)
Projection distance
(1.43m/56.3 inches to 14.86m/585 inches)
100 203 152
(240" 180")
(200" 150")
(160" 120")
(120" 90")
(80" 60")
(40" 30")
WIDE
TELE