NEC HT410 Projector User Manual


 
E-4
Top Features
LAMP
STATUS
POWER
SOURCE
AUTO
ADJ.
ON/STAND BY
SELECT
3
2
4
5
8
7
16
9
10
1. INTRODUCTION
1. ON/STAND BY button ( )
Use this button to turn the power on and off when the main power is supplied and the projector is in standby
mode.
To turn on the projector, press and hold this button for a minimum of two seconds. To turn off the projector,
press this button twice.
2. POWER indicator
When this indicator is green, the projector is on; when this indicator is orange, it is in standby mode. See the
power Indicator section on page E-49 for more details.
3. STATUS indicator
If this light blinks red rapidly, it indicates that an error has occurred, the lamp cover is not attached properly or
the projector has overheated. If this light remains orange, it indicates that you have pressed a cabinet key
while the Cabinet Button is locked. See the Status Indicator section on page E-49 for more details.
4. LAMP indicator
If this light blinks red rapidly, it’s warning you that the lamp has reached the end of its usable life. After this light
appears, replace the lamp as soon as possible (See page E-45). See the Lamp Indicator section on page E-
49 for more details.
5. SOURCE button
This button will allow you to select a video source such as a PC, VCR or DVD player.
Press and quickly release this button to display the Source list. Each time this button is pressed, each source
name will be highlighted in sequence. Highlighting a source name for 2 seconds without pressing the ENTER
button will display the selected source.
6. AUTO ADJ. button
Use this button to adjust an RGB source for an optimal picture (See page E-27).
7. MENU button
Displays the menu.
8. SELECT ̆̄̇̈ / volume +/- buttons
̆̄ : Use these buttons to select the menu of the item you wish to adjust.
̇̈ : Use these buttons to change the level of a selected menu item. When no menus appear, these buttons
work as a volume control.
9. ENTER button
Executes your menu selection and activates items selected from the menu.
10. EXIT button
Pressing this button will return to the previous menu.
While you are in the main menu, pressing this button will close the menu.