Filter
Top Products
E-44
Reset
Returning to Factory Default [Factory Default]
The Factory Default feature allows you to change adjustments and settings to the factory preset for a (all)
source (s) except the following:
[Current Signal]
Resets the adjustments for the current signal to the factory preset levels.
All the items in “Picture”, “Adjustment (except “Wall Color”)” and “Image (except “Keystone” and “Keystone
Save”)” can be reset.
[All Data]
Reset all the adjustments and settings for all the signals to the factory preset.
All items can be reset except Language, Background, Communication Speed, Security, Remaining Lamp
Time, Lamp Hour Meter, and Projector Usage.
To reset the lamp usage time, see “Clear Lamp Hour Meter”.
Clearing Lamp Hour Meter [Clear Lamp Hour Meter]
Resets the lamp clock back to zero. Selecting this option displays submenu for a confirmation.
NOTE: The projector will turn off and go into standby mode after 2100 hours (up to 3100 hours in Eco mode) of service. If
this happens, press the HELP button on the remote control for ten seconds to reset the lamp clock back to zero. Do this
only after replacing the lamp.
5. USING ON-SCREEN MENU