Filter
Top Products
E-35
Menu Descriptions & Functions
Picture
You can adjust brightness, contrast, sharpness, color, hue, noise reduction and Telecine.
NOTE: When one of Brightness, Contrast, Sharpness, Color or Hue is highlighted, pressing the ENTER button will display
its slide bar for adjustment.
Brightness...... Adjusts the brightness level or the black level of the image.
Contrast ......... Adjusts the intensity of the image according to the incoming signal (White level of the image).
Sharpness ..... Controls the detail of the image for Video.
Color .............. Increases or decreases the color saturation level (not valid for RGB).
Hue ................ Varies the color level from +/- green to +/-blue. The red level is used as reference. This adjust-
ment is only valid for Video and Component inputs (not valid for RGB).
Noise Reduction ..
Tu rn on or off the noise reduction feature. To reduce video noise, select On.
NOTE:
• This feature is not available for 480p, 576p, 720p and non-1080i HDTV and RGB signals
• Noise reduction set to off gives best image quality by way of higher bandwidth. Noise reduction set to
on softens the image.
Telecine ......... Use 3:2 pull down correction to eliminate jitter and artifacts in video.
Auto: For film source such as a DVD player.
Off: For signals other than film sources.
NOTE: This feature is not available for 480p, 576p, 720p and non-1080i HDTV and RGB signals
Adjustment
You can adjust Wall Color, Color Management, Gamma Correction, Color Temperature and White Peaking.
Selecting Wall Color Correction Mode [Wall Color]
This function allows for quick adaptive color correction in applications where the screen material is not white.
The following eight options are available: Off, Blackboard, Light yellow, Light green, Light blue, Sky blue, Light
rose and Pink.
5. USING ON-SCREEN MENU