Filter
Top Products
4-10 Configuring Your Server
PCI Configuration
– Embedded SCSI submenu
Option Parameter Description Your Setting
SCSI Controller [Enabled]
Disabled
Enables or disables the onboard SCSI
controllers.
Option ROM Scan [Enabled]
Disabled
If Enabled, initialize device expansion ROM.
[ ]: Factory-set
– Embedded NIC (Dual Gbit) submenu
Option Parameter Description Your Setting
LAN Controller Disabled
[Enabled]
If Disabled, the BIOS will hold the
embedded chip in reset. In this
configuration, the controller hardware is
completely disabled, and will be invisible to
the PnP operating systems.
Option ROM Scan [Enabled]
Disabled
If Enabled, initialize device expansion ROM.
[ ]: Factory-set
– Embedded Video Controller submenu
Option Parameter Description Your Setting
Onboard VGA
Control
Disabled
[Enabled]
If Disabled, the BIOS will hold the
embedded chip in reset. In this
configuration, the controller hardware is
completely disabled, and will be invisible to
the PnP operating systems.
[ ]: Factory-set
Option Parameter Description Your Setting
PCI Slot 1B/2B/3B
Option ROM
Disabled
[Enabled]
Used to enable or disable an option ROM
on a PCI board connected to the full-height
riser card.
PCI Slot 1C/2C/3C
Option ROM
Disabled
[Enabled]
Used to enable or disable an option ROM
on a PCI board connected to the low-profile
riser card.
Option PCI-X
Riser Support
[Disabled]
Enabled
Used to enable or disable an option N8112-
02 riser card (PCI-X).
PCIe Option Mode
[Disabled]
Enabled
Cannot be used in this system. Do not
change the factory setting.
[ ]: Factory-set