Filter
Top Products
5-46 Installing the Operating System with Express Setup
Installing RAID Controller Driver (N8103-80F/81F)
To additionally install the N8103-80F/81F in a system containing Windows 2000, connect the
controller and take the following steps to install the driver:
1. When the [Found New Hardware Wizard] dialog box appears, click [Next].
2. When the [Install Hardware Device Drivers] dialog box appears, select [Search for a
suitable driver for my device (Recommended)], and click [Next].
3. When the [Locate Driver Files] dialog box appears, select [Floppy disk drives], insert
"Windows Server 2000 OEM-DISK for NEC EXPRESSBUILDER" into the floppy disk
drive, and click [Next].
4. When the [Driver Files Search Results] dialog box appears, click [Next].
5. Copying of the driver is completed, and the [Completion of the new hardware detection
wizard] dialog box below appears. Click [Complete].
Graphics Accelerator Driver
Standard graphics accelerator drivers that are mounted will be installed automatically.
The following is the procedure when it is necessary to install manually.
If you want to utilize optional Graphics Accelerator Driver board, follow the document attached to
the board to install the driver.
* For the graphics accelerator driver, the use of a remote KVM console that installs the advanced
N8115-02 remote management card is supported by the standard.
1. Insert the NEC EXPRESSBUILDER CD-ROM into the CD-ROM drive.
2. Click Start menu, point to [Programs], [Accessories] and click [Windows Explorer].
3. Run "SETUP.EXE" in the following directory.
<CD-ROM Drive Letter>:\WINNT\W2K\VIDEO\SETUP.EXE
4. Follow the message to continue the installation.
If the dialog message "Digital Signature could not been found." appears, select [Yes] to
continue. If the dialog message "Direct X Ver.8 isn't installed." appears, select [continue]
to continue.
5. Remove the NEC EXPRESSBUILDER CD-ROM from the CD-ROM drive, follow the
direction on the screen and restart the system.
USB 2.0 Driver
USB 2.0 Driver is pre-installed.
When restoring the system or re-installing the system, the driver is automatically installed in the
process of updating the system.