Filter
Top Products
Installing the Operating System with Express Setup 5-21
Installing Disk Array Controller Driver (N8103-80F/81F)
To additionally install the N8103-80F/81F in a system containing Windows Server 2003, connect
the controller and take the following steps to install the driver:
<In the case of use of Windows Server 2003 SevicePack1 or Windows Server 2003
R2>
1.
Start [Device Manager] from [Start] menu → [Control Panel] → [Administrative Tools]
→ [Computer Management].
2. Double-click [LSI Logic Megaraid SCSI 320-1/2] which Device Manager lists.
3. Click the [Driver] tab and click [Update Driver...].
4. When the "Update Device Driver Wizard" appears, select "Install from a list or specific
location [Advanced]" and click [Next].
5. Select the "Search for the best driver in these locations." and check the "Search removable
media [floppy, CD-ROM...]" check box.
6. Insert "Windows Server 2003 OEM-DISK for NEC EXPRESSBUILDER" into the floppy
disk drive, and click [Next].
7. Copying of the driver is completed, and the [Completing the Hardware Update Wizard]
dialog box below appears. Click [Finish].
<In the case of Windows Server 2003 which has not installed SevicePack1>
1.
Start [Device Manager] from [Start] menu → [Control Panel] → [Administrative Tools]
→ [Computer Management].
2. Double-click the SCSI Controller driver which Device Manager lists as Other device.
3. Click the [Driver] tab and click [Update Driver...].
4. When the "Update Device Driver Wizard" appears, select "Install from a list or specific
location [Advanced]" and click [Next].
5. Select the "Search for the best driver in these locations." and check the "Search removable
media [floppy, CD-ROM...]" check box.
6. Insert "Windows Server 2003 OEM-DISK for NEC EXPRESSBUILDER" into the floppy
disk drive, and click [Next].
7. Copying of the driver is completed, and the [Completing the Hardware Update Wizard]
dialog box below appears. Click [Finish].