Filter
Top Products
Configuring Your Server 4-23
Advanced Configuration
Move the cursor onto "Advanced Configuration" and press Enter to display the submenu.
The following table lists submenu items, available parameter, and descriptions.
Submenu item Parameter Description
Reset SCSI Bus at
IC Initialization
[Enabled]
Disabled
Select "Enabled".
Display <Ctrl><A>
Message During
BIOS Initialization
[Enabled]
Disabled
Select "Enabled".
Extended Int 13
Translation for DOS
Drives > 1 GByte
[Enabled]
Disabled
Select "Enabled".
POST Display Mode [Verbose]
Silent
Diagnostic
Select "Verbose".
SCSI Controller Int
13 Support
[Enabled]
Disabled:
NOT Scan
Disabled:
scan bus
Enable or disable SCSI BIOS.
Select "Enabled" for most cases other than the
following:
• To boot the OS from a hard disk drive
connected to any other controller than SCSI
controller. (If the controller has no hard disk
drives connected, there is no problem.)
• BIOS of the SCSI controller may be disabled to
reserve an area in the expansion ROM space
if the controller has no hard disk drives
connected.
Domain Validation [Enabled]
Disabled
Select "Enabled".
Support Removable
Disks Under Int 13
as Fixed Disks
Boot Only
All Disks
[Disabled]
AIC-79xx BIOS automatically controls the
removable disks.
BIOS Support for
Bootable CD-ROM
[Enabled]
Disabled
Select "Enabled".
[ ]: Factory-set
HostRAID
Move the cursor onto "HostRAID" and press Enter to choose the HostRAID option.
Submenu item Parameter Description
HostRAID Enabled
[Disabled]
Select "Disabled" if the onboard HostRAID
controller is not used.
[ ]: Factory-set
NOTE: For detail explanation on the HostRAID feature, see
SCSISelect Utility User's Manual and Adaptec Storage Manager -
Browser Edition User's Guide or Adaptec Storage Manager User's
Guide. You may view or print these documents from the NEC
EXPRESSBUILDER CD-ROM.