NEC N8406-019 Switch User Manual


 
- 118 -
Changing Port Data Rate
After completing login to the console of the FC Switch Module, change the port data rate of each
port on the FC Switch Module according to the procedure below. (The setting is always required.)
Setting at shipment from factory
The port data rate is fixed to 4G bps for every port when an FC Switch Module is shipped from the f
actory.
The port data rate of an FC Switch Module must be set to be the same as
that of fibre channel devices connected to the FC Switch Module. If the port
data rates are different, the connected fibre channel devices cannot link up
to the FC Switch Module. For the port data rate of each fibre channel device
to be connected to the FC Switch Module, refer to the User’s Guide of the
fibre channel device.
1. Type "portcfgshow" on the console screen.
Any commands used on the switch console should be specified with
lowercase letters.
2. The current port settings appear.
WH040000350:admin> portcfgshow
Ports of Slot 0 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
------------------+--+--+--+--+----+--+--+--+----+--+--+--+----+--+--+--
Speed 4G 4G 4G 4G 4G 4G 4G 4G 4G 4G 4G 4G 4G 4G 4G 4G
Trunk Port ON .. .. .. .. .. .. .. .. .. .. .. .. .. .. ..
Long Distance .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. ..
VC Link Init .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. ..
Locked L_Port .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. ..
Locked G_Port .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. ..
Disabled E_Port .. ON ON ON ON ON ON ON ON ON ON ON ON ON ON ON
ISL R_RDY Mode .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. ..
RSCN Suppressed .. .. .. .. .. .. .. .. .. .. .. .. .. .. .. ..
Persistent Disable .. .. ON ON .. ON ON ON ON ON ON ON ON ON ON ON
Ports of Slot 0 16 17 18 19 20 21 22 23
------------------+--+--+--+--+----+--+--+--
Speed 4G 4G 4G 4G 4G 4G 4G 4G
Trunk Port .. ON ON ON ON ON ON ON
Long Distance .. .. .. .. .. .. .. ..
VC Link Init .. .. .. .. .. .. .. ..
Locked L_Port .. .. .. .. .. .. .. ..
Locked G_Port .. ON ON ON ON .. .. ..
Disabled E_Port ON .. .. .. .. .. .. ..
ISL R_RDY Mode .. .. .. .. .. .. .. ..
RSCN Suppressed .. .. .. .. .. .. .. ..
Persistent Disable ON .. .. .. .. .. .. ..
where AN:AutoNegotiate, ..:OFF, ??:INVALID.
WH040000350:admin>
The port status display also includes the information on the ports
unavailable to N8406-019. However, this is not an error.