Filter
Top Products
- 137 -
Modifying or Deleting Zone
The following describes modification or deletion of a zone already created.
After modification by using a relevant command, confirm that the
modification is done normally by using the "zoneshow" command.
1. Add port information, WWPn and zone alias name to a zone.
Use the "zoneadd" command.
Using the "zoneadd" command allows additional information (including port information, WWPn and
zone alias name) to be added to a zone.
zoneadd "zonename" , "member" <enter>
(1) (2)
(1) zonename:
Specify a zone name with it enclosed with double quotation marks (").
(2) member:
Specify port information, WWPn or zone alias.
Delimit the zone name and additional information with a comma (,).
Delimit adjacent additional information with a semicolon (;).
2. Delete port information, WWPn and/or zone alias name from a zone.
Use the "zoneremove" command.
Using the "zoneremove" command allows port information, WWPn and/or zone alias name to be
deleted from a zone.
zoneremove "zonename" , "member" <enter>
(1) (2)
(1) zonename:
Specify a zone name with it enclosed with double quotation marks (").
(2) member:
Specify port information, WWPn or zone alias.
Delimit the zone name and additional information with a comma (,).
Delimit adjacent information to be deleted with a semicolon (;).
3. Delete a zone created already.
Use the "zonedelete" command.
Using the "zonedelete" command allows a zone to be deleted.
zonedelete "zonename" <enter>
(1)
(1) zonemame:
Specify a zone name with it enclosed with double quotation marks (").